This time it's insulation for the walls for the main purpose of keeping the warm side warm and the cold side cold.Priority One spray foam insulation came last Thursday with a big trailer and long hoses to start the process. They're spraying 2# foam on the brick exterior walls, and 1/2# (quick expanding, but more flexible) foam on the roof rafters. We were barely a step ahead of them, finishing up the furring on the windows and walls from all those times we knocked off at 9PM thinking, "I'll get that tomorrow" and then promptly forgot to finish it until now.
The stuff, once sprayed, hardens within a minute, doesn't smell bad at all, and it really very cool.
They sprayed it inbetween the 1x3 and 2x4 furring strips on all of the walls, and then, when it hardened, would scrape off the excess off of the wood.
It's a light, pale yellow color and when they finished a room, it looked like they buttered the house.
The guys wore full body coverings and masks, and if you decide to do this yourself, I also recommend you do the same.
It took them all of Thursday and Friday to spray the exterior walls and the rafters of the third floor. They'll be back on Tuesday with smaller tanks fill in the small missed areas with slower rising foam that they can use to get in the tiny cracks.
They suggested we get a can of spray paint and mark all the areas they missed in order to speed up the process.
They would've been here today, but apparently a few of them have to repair tree damage to their homes and cars.
I understand completely.
See you tomorrow, guys. ;-)
(Addendum by DH: I am going to recommend these guys, from what I've seen so far. Dilligent and responsive management and lots of responsibility. They WANT you to have a tight home. By doing this process I get significant insulation in my walls without losing a full 3 1/2" on all four walls. That's more than 70 square feet (and nearly 600 cubic feet), if my math is correct -48' long house 16' wide, 2 1/2 stories- I get a perfect vapor barrier and insulation that never settles, never falls out of place, never lets cold air through it, and provides R7 per inch. The alternative without building out the walls is not much insulation at all.
Without spray insulation on the walls, I can't imagine that we wouldn't pay $100/mo. more in utilities. Probably more. Plus, we'd STILL be spending a goodly penny insulating and building out the attic and basement to try to get some decent insulation. At $1200 year, the whole job pays for itself in 5 years. Not the price differential--the whole job. It's a no brainer. The house is sealed up tight like a big igloo cooler and it's done. We can move on once the last holes and missed spots are foamed in.
Now, I COULD have done this myself, but my estimate was not that much less (maybe 20%) than my bid to have someone else do it, take all the risk, and do all the work and all the clean up. I'm an optimist, but I'm pretty confident that I'd waste quite a bit and that I might underestimate things. It's possible that I'd screw up badly too. I don't have to worry about that and I've got time to push other aspects of the job forward.
I think that anyone who's insulating bare walls needs to consider this. If you're local, know that I found this company's bid to be the most competitive, too.)
